 |
|
 |
|
 |
|
 |
|
|
|
||||||||||
|
|
|
|
|
|
Newest Bikes at the top!
Mike Yeti ARC from the USA
Hello I'm bob from Holland (Barendrecht) and this is my bike. It's a Yeti arc 2009 Specs: Yeti Arc size small, full xtr, Dt swiss wheels, Sdg ti-fly saddle, Thomson masterpiece seatpost, Thomson stem, Easton ec90 handlebar, Schwalbe tires, Dt swiss titanium qr, Fox 32 rlc15 mm, Odi yeti grips, Topeak carbon bottle cage and Chris King head set.
My name is Marco from north Italy, this is the picture of my new ARC, very very good bike..................
2009 ARC, full XT with a Rock Shox SID and some RaceFace parts. Nothing really special, but it rides extremely well: nothing like the GT and Klein I had before! Eef
I`m Michael from Germany! And this is my ARC!
This is Rafael's YETI ARC, very rare in Orange. From around 2002-03
My Team coloured YETI ARC James - Hong Kong.
Yeti Arc - Durango built 1998.
Fred
Steves new ARC, built with quality parts from Rockshox, Shimano XT, Thomson, Maxxis & Hope. Note the new 2010 rear end with no brake bosses!
this is my 2007 ARC model of Yeti. The components are:
Alvaro.
I just finished building this 2008 ARC and thought you might like a photo. I did not go crazy on this and tried to use mid-line parts to keep the cost reasonable. SLX shifters and derailleurs, XT crank and rear cassette, Avid 7 brakes and Ti levers, XTR hubs attached to low end Mavic rims (used--but are dead straight--I'll upgrade them later), Recon Race fork and FSA carbon post. I did splurge on King bearings and also found an old NOS set of Ringle bars and Yeti grips. Came in at 24.5 pounds, not bad for using mid-line parts and super old school pedals! Thanks for the great site, please post any old ARC tests you might find (as I cannot find them anywhere). Rock on! Billy Jolt- Calif. USA
ARC, Easton Carbon bars, post, stem, Sram XO drivetrain, XT cranks, Mavic CrossMax, Specialized Captains(Stan's), Time pedals
I have been part of the Yeti tribe for about 15 years now and have enjoyed your site for much of that time.
Cheers- Tom J (Bromley, UK)
She is now finished with the following parts, YETI ARC 2008 SIZE SMALL, FORKS FOX RCL 100, STEM THOMSON ELITE X4, BARS RITCHEY WCS, BRAKES AVID SL V BRAKES WITH NOKON
CABLES , SEAT POST THOMSON ELITE , SADDLE FLITE TITANIUM , GROUPSET SHIMANO XT / XT SHADOW , RIMS RITCHEY ROCK COMP, TYRES OLD SCHOOL PANARACER MAGIC. I have stuck with the V brakes, as they are so powerful combined with the Nokon cables, they are as sharp as any disc brake I have ever used.
Here are three pics of my A.R.C. It's a very early 1992 frame, number is A158. It took me three years to find all the parts, but it was well worth the wait. It's fitted with 3-D violet components from the early 90s era - Ringle and Grafton.
My current Yeti ARC which was one of the very last U.S made Easton tubed ARC's. Here's the spec:-
I've been saving for this bike for ages and I'm so happy with the way it has turned out! When I stopped mountain bike racing and turned to the dark side Yetis where the ones to have. So when I decided that I was going to have a crack at XC racing I had to have one!!! I just hope that my skill levels haven't left me for good and that they can keep up with my roadie legs!! Can't wait to get racing! Ben- in Wiltshire
An update to Andrea's last pictures
I bought this 1998 Yeti ARC at the Boulder Recycler (a high-end consignment shop) in Boulder, CO back in the summer of 2001. It was sitting right next to a black ARC prototype that just had one
"Easton" decal on its downtube - as you can imagine, both bikes caught my eye right away. Supposedly, John Tomac (Parker?) had dropped them off a couple days earlier. While I could only afford this
Yeti at the time, I still regret not buying that Easton prototype as well... oh well, hindsight is 20/20. After 3 years of riding in Jackson Hole, WY and the last 4 years in storage, I am about to restore the ARC to top-notch condition. Before I do so, I wanted to send along a couple pics for you and the rest of the Yeti fans before restoration. Here it is with the Yellow Judy SL, Yellow Selle Italia Ti, Syncros Seatpost, Syncros Stem, Titec Ti Bar, XTR Cranks/Hubs/Rear Derailleur, original Yeti/Troy Lee paint/decals, etc. Of course, I'll send some shots of this ARC as soon as the restoration is complete! Thank you, and enjoy!
I bought the frame on ebay summer 08. it has fox vanilla forks,mavic cross max wheels,old school race face crank 1994ish.hope stem and the brilliant salsa moto bars,a great alternative to riser bars.very comfy intake volair saddle,its heavy but what the hell. cheers Mike from Lancashire
My 2008 Yeti ARC , size is small, Please add my Bike to your Website Yetifan The parts are , Folks exotic rigid carbon, stem/bars Matrix one peace carbon, Brakes Avid single digit, Group set Shimano XT Shadow, Rims Ritchey Rock Comp. Tires panaracer magic, Saddle Bontrager. This bike is super light and super Fast. from Mark , Cairns Australia.
With the Sus forks and is currently weighing in at bang on 20 lbs it was 16.9 when it was single speed and ti pace forks and those silly maxxis maxlite tyres (see photo), but it was no good for racing like that so I have had to compromise with 18 gears and a little give in the front end.
This is my Yeti, These are the details. Owner: Mark Terrill Address: Melbourne, Australia Bike: Yeti ARC 2008 Wheels: TWE with White powder coated rims Mostly XT/XTR Forks: Reba Race 2008
Great website!!!! My 96? ARC - Much loved had a lot of use over the last couple of weeks. I got it second hand from bromley in 98 after my Pace got nicked!!! It had HED wheels but they are no more. Keep up the good work. Paul www.mulley-photography.com
Bought used at the end of 2006, I built the frame with full XT groupset, Fox F100- USE carbon post & bars, Thomson stem. XT SPD, DT 4.2 rims, XTR disc brakes. Its a great winter bike & I love riding it. Its a USA made frame too, so thats a winner! Andrew
I hope you like this Arc. Thanks. Bye
My name is Mingo and I am from the island of Menorca (Balearic Islands) SPAIN. This is my YETI ARC.
I'd like to contribute with a couple of shots of my recently purchased Yeti ARC. The frame is – as you know – fabulous. The specs are functional and durable. I'm very excited to test out the Magura Fork, as its rarety here in Denmark . After the first ride it seems as a superstiff and plush do-it-all fork. But it needs tuning to fit my needs better. Note, that the bike on the pictures is set up to fit my girlfriend – she took it for spin, and she was thrilled as well. I ride it with the post way up and CB Eggbeater pedals. The bike is overall lots of fun – I'm not really into hardcore xc-racing, but just out there to have fun! And it's great! Best regards, Simon, Copenhagen , Denmark
My name is Nick, I live in England and this is my YETI ARC 08. I've just finished building it and these photos show it after a rather dusty first outing. Currently I'm running a combination of Race Face and XT with Juice Sevens doing the stopping. Up front I've gone with Fox 32 RLCs. Wheels are Hope Pro IIs laced into DT Swiss 5.10. All the usual extras include Chris King headset, Thomson post and headset, Easton flat bars and a Charge saddle. Still haven't managed to wipe the smile off my face. Nick
Just thought I'd send in some pics of my ARC which is accompanying me to the MTB Orienteering World Champs.
Alex Randall - Australia
We've got you some Yetis for your Homepage. We have a Ultimate, a FRO, a ARC, two ARC AS and two ARC AS LT. Probably the largest collection of Yetis in Switzerland! The owner of the mentioned Bikes is Stefan from Cycleworks. Details to the bikes can be found on our homepage. Have a look under http://www.cycleworks.ch/index.php?option=com_content&view=article&id=48&Itemid=57
My name is Adam from Australia and i have been slowly been building it up for a while now. Anyways a bit of a rundown..
Thanks. - Love the site! Keep it up! - Adam.
Here are some pics of my Arc Ti. I got the frame from the States at the beginning of the year and have been slowly building it up since. Still a few parts i would like to change but at least its up and running. Its my first real XC bike!!
Hamid YETI ARC 2007 (Added May 08) I am hamid and I come from Holland this is my Yeti ARC its yesterday finish on the arc are parts like formula the one greg minnaar limited edition 250 , and more like chris king ti , iso disc, tune , race face , and the orginal flite ti from 1998 white red and yellow letters, Thanks ciao ciao
This is my current ARC, ready for the Tribemeet '08. It's a frame '99 (hand made in Durango) and the RS Sid also '99. Then, the headsets Ringlé and the famous brake Avid Arch Suprem are "old school". Finally the all sparts are new, Thomson seat post and stem, Easton carbon bar, Mavic ST wheelset, Noby Nic tire, Sram X0 and X9, XT crankset and a WTB Yeti saddle. For information, the weight is 10,2kg. See you, Niquo.
Congratulations for your site. My name is Niquo, I live in the south of Paris (France not Texas LOLL), with the forest of Versailles with 500m of my house. I built my first Yeti in 1995. It was an Arc model. You will find some pictures with this message. I will collect you other pictures in action, and also about my current Arc. Go fast, ride hard and have fun, Niquo.
Here's my new 08 ARC. It will be raced that season in Swisspowercup races. My team is called Yeti Ullmann, and we're located in Diessenhofen. Happy trails & greez from Kevin Krieg, Uhwiesen/Switzerland!
Just picked up my Yeti ARC '08 frame and custom build from Bromley bikes – Apparently it's the second only 2008 frame sold in the country. Got to say as you would expect it rides brilliantly. 23 ½ pounds of fun. Spec: Yeti ARC frame- XTR front, rear and shifters. Avid juicy 7 brakes, Race Face Deus cranks with XTR SPDs, Thomson X4 stem, Thomson in line seatpost Chris King headset, Wheels – Hope pro 2 hubs, Mavic 719 disc rims, Maxxis high roller tyres Yeti Grips, And a bloody big smile to top it off……climbs superb… Keep up the goodwork, Lance
Bought this as a frame last year from Rob at BETD on ebay and have been in love with it ever since! Was fitted with Fox F100 but now with Rockshox Reba, XT groupset, magura louise FR brakes and thomson seatpost and stem. Rides great and looks even better. Regards Dave in Shropshire
What a Great web site! Here are my two yeti's I would like you t add to your collection. My first love is my 1992 ARC and second is my 2007 ARC. My 1992 is still ridden and raced on a weekly basis. What a testimate to the Yeti name and quality, still going strong after 16 years. Thank you, Mark Young, CO
I am pleased to send you pictures of my YETI ARC 2007. So far the best bike I have ever had. Very smooth on long distances ;-) Some minor modifications for 2008 are planned (disc brakes etc.).
Yeti ARC 2007 Shimano XTR 2007 RockShox Reba WC 2007 After the Race
My 2007 ARC. Andrea Folin.
My name is Andrea Amato,from Italy,I send to you the pictures of my brand new YETI ARC 19" ,the bike is full 2007 Shimano XTR equiped ,Race Face Next carbon bar and seatpost. Is really nice, Many thanks and see you.
Carolina's yeti arc 2005. Marçal and Carolina from Catalonia
Original ARC with rockshox Judy .
from Zibido s.Giacomo (milano) ITALY this is my special bike ARC model 2007 with sram xo group, truvative stylo team , marzocchi corsa , crossmax lx.
ARC Ti from 2002 in Japan.
This is my ARC (04 Model, Scandium frame) with "the latest upgrades": custom wheels (DT XR4.1/Edco/Sapim CX Ray) and a Fox F100 RLT … The weight of it is about 10.5Kg but the most important think is that the bike is fantastic ! That's all for now, keep up the good work! Manolis
. |
Mike YETI ARC (Added July 2010)
Marco YETI ARC (Added May 2010)
Michael YETI ARC (Added May 2010)
James ARC (Added April 2010)
Fred YETI ARC (added March 2010)
Alvaro ARC 2007 (Added January 2010)
Billy YETI ARC 08 (Added December 09)
Marc YETI ARC 92 (Added October 09)
Christiaan YETI ARC 07 (Added September 09)
Andrea YETI ARC (Added June 09)
Mark YETI ARC 2008 (Added March 09)
Simon - 2006 YETI ARC(Added August 2008)
Niquo ARC 99 (Added April 2008)
Ryotas YETI ARC (added July 2007)
